Power supplies & transformers
Power Supplies(ABL2,ABL4,ABL7 & ABL8 Series)
- Input voltage:
single-phase 100-240 V
- Output voltage:
- • Regulated single-phase 12 and 24 VDC / 60 W-240 W
- • Optional anti-harmonics filter conforming to standards IEC/EN 61000-3-2
- • Thermal protection incorporated on the entire range
- • Connection terminal block protection
- • UL CSA certification
- • Protection against overloads, short-circuits and overvoltages
- • Fixing by screw or on 35 mm rail as option
Transformer(ABT7 & ABL6 Series)
- Universal range 25 VA to 2500 VA - Double winding
- • Fixing on omega rail (depending on model) or panel (screw)
- • Secondary earthing by plug-in jumpers (depending on model)
- • Signalling LED
- • Operating temperature: +60°C
- • Series/parallel wiring of secondary windings by plug-in jumpers (depending on model)
- Optimum range 25 VA to 2500 VA - Single winding
- • Fixing on panel (screw) or on omega rail (option depending on model)
- • Operating temperature: +50°C
- Economy range 40 VA to 400 VA - Single winding
- • Fixing on panel (screw)
- • Operating temperature: +40°C
Harmony Series Switches & Indication lamps(XB5/XB7Series
- • Pushbuttons, spring return
- • Multiple-headed pushbuttons, spring return
- • Emergency Stop or Emergency switch off functions with turn to release, key release or push-pull action, Ø 30, 40, 60 mm
- • Selector switches and key switches
- • Pilot lights (LED, incandescent and neon lights)
- • Combined functions: contact + signalling
- • Complete products or sub assemblies for user assembly
- • Connection: screw clamp terminals, plug-in connector, Faston connectors, spring clamp terminals.
- • Conformity with IEC, UL, CSA standards
- • IP65, NEMA 3
- • Protected terminals
- • Screw clamp connection
Wireless & Battery Less Pushbuttons(XB5R Series)
- Harmony XB5R simplifies the wiring of your machine due to wireless technology
- • Reduce costs and time during installation
- • No set-up needed thanks to the ready-to-use Plug & Play package
- • Freedom to move around the machine
- • Ideal solution when you need to change the command location
- • No battery to replace
- • No battery to recycle
- • Energy efficient
- • No cable to potentially damage
- • No screw terminal issue due to vibration
- • Less dust penetration - no cable entry in the transmitter enclosure
- • ø 22 mm operating head available in plastic (ZB5) and metal (ZB4) and ø 40mm impulsion mushroom black head allowing operation with gloves.
- • For automatic doors, the rope pull switch command can be set anywhere
- • Suitable for the most demanding environments, depending on the model, up to IP 66, for external use from -25 to 70°C
- Control, even over long distances
- • 25m with the receiver installed in a metal electrical cabinet
- • Boosted to 40m with use of external relay antenna with the receiver installed in a metal electrical cabinet
- • 300m in free space.
Harmony - Control stations(XALD,XALE,XALG Series)
- Harmony - Control stations(XALD,XALE,XALG Series)
- Complete stations:
- • Ready to use, the 45 complete XALE stations are fitted with 1, 2 or 3 Ø 22 mm control and signalling units from the Harmony® XB7 range
- Stations for customer assembly:
- • 4 empty enclosures with 1, 2 or 3 cut-outs for user fitting of Harmony® XB7 units, in order to meet specific requirements.s)
- • Mechanical resistance of product: IK05
- • Conformity to main standards: IEC/EN 60947-1, IEC/EN 60947-5-1, IEC/EN 60947-5-5, IEC/EN 62208
- • Certification: CE
- • Degree of protection: IP54
Signaling Units (XVM,XVGB,XUV,XVR,XVX series)
- • Degree of protection: IP 54
- • International standards: CE, CCC
- • Buzzer (85 db) integrated in the base unit. Its signal is selectable and adjustable: choice of 2 tones, adjustment of noise level
- • Light sources fully interchangeable: incandescent bulbs, Super Bright LED with steady or flashing light,
- "Flash" discharge tubes on Ba15d base fitting
- • Modular units stack vertically by simply interlocking and electrical connections between each unit are made automatically during assembly.
- Indicator banks supplied complete (pre-assembled and pre-cabled):
- • Composition of 1, 2, 3 & 4 illuminated units, with or without buzzer, with fixing system for horizontal or vertical mounting. Indicator banks supplied as separate components for customised assembly:
- • 5 illuminated units maximum: red, orange, green, clear or blue.
- • Three types of fixation adapted to your needs :
- • Support tube with metal bracket (vertical mounting)
- • Support tube with plastic fiwing plate (horizontal mounting)
- • Plastic fixing plate (horizontal mounting)
